Server Error 404 – File or directory not found – When accessing Remote Web Access

5 Replies

Here is a compatibility issue I ran into a couple times. When a someone tries to access their remote web access portal, they get an error. After putting in their credentials the remote web access portal will begin to load then all of a sudden they will get the following error.  Server Error 404Server Error 404Server Error 404Server Error 404Compatibility View SettingsServer Error 404Server Error 404

Server Error 404

Server Error  404 – File or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.    

Sometimes this error indicates something more serious, but recently I have found that you will get this error because of an Internet Explorer 11 and remote web access incompatibility.

The first thing to do is check which version of Internet Explorer you are using. Go to the Gear icon and click about Internet Explorer. Check if you are running Internet Explorer 10 or 11. If you are , add your remote web access URL into the compatibility mode list.

Here are the steps to add the site into Compatibility View. Click the gear icon

Compatibility View Settings

and select the Compatibility View Settings options. Add your website to the Compatibility View list and hit Close. Refresh your tab and see if that makes a difference, it did for me.

This was posted by techspeeder.

How to Configure a Actiontec DSL Modem for Century Link

1 Reply

Here are the settings to configure you Actiontec DSL Modem with Century Link as your Internet provider. The modem I used for this blog post was a Actiontec  GT701D.

First off plug the power cable and DSL cable into the modem. Next plug one end of the Ethernet cable into the modem and the other end into your computer. Check to make sure the Power light, DSL light, and Ethernet light are all solid green. If the DSL light is not solid green call Century Link. Something is not right with your Internet connection and you will not be able to configure the modem without a good DSL signal.

Open your browser and type in the IP address of the modem. Normally the IP address of the modem will be 192.168.0.1 .  This should take you to a “Main Menu” screen. Normally I try the “Auto Configure Your Gateway” option, but most times it doesn’t find the settings for Century Link. If it doesn’t find the settings, click on the “Manual Setup” option.

Select the “RFC1483 via DHCP” option under Quick Setup and then Apply.

ISP

 

Next go under Advanced Setup and click DSL Settings.
Continue reading →

Import AutoComplete file into new Outlook 2010 Profile

Leave a reply

Recently after a new server install, I ran into this issue.  When installing a new server I took the computers off the old domain and joined them to the new one. During this process I made a new Windows profile. Once joined to the new domain, I logged into the new Windows 7 profile and started setting up Microsoft Outlook 2010 .  I got the email account set up just fine however, the autocomplete was missing. Here is how I rescued my autocomplete file. These users were running Windows 7 and Microsoft Outlook 2010.

Please follow the steps carefully, I tried to explain this tedious task the best I could 🙂 .

Step One: Browse to your old Windows’ profile autocomplete guid: C:\Users\<oldusername>\appdata\Local\Microsoft\Outlook\RoamCache

autocomplete cache

In Outlook 2010 and newer your autocomplete file is stored as a Dat File. The file will begin with Stream_Autocomplete_ and then the guid number/letter combo . 

Step Two: Browse to your new Windows’ profile autocomplete guid: C:\Users\<newusername>\appdata\Local\Microsoft\Outlook\RoamCache Continue reading →

Microsoft Outlook: Delivery has failed to these Recipients or Groups

5 Replies

Our customer recently switched to Microsoft’s Office 365 exchange service as their email provider. Previously to this transition, this company was hosting their own exchange server. After the upgrade some of the employees would get an error message when emailing within the organization.  Here is the message:Outlook Errorscreenshot.bmpscreenshot

sreenshot

The email address you entered couldn’t be found. Please check the recipient’s email address and try to resend the message. If the problem continues, please contact your helpdesk.  Outlook ErrorOutlook Error

Continue reading →

Merlin Halteman

January 31, 2014

Cheat Sheet for Device Passwords and Logins

Device: Konica Minolta Bizhub C252

Username: Administrator

Password: 12345678

Source: http://www.copytechnet.com/forums/showthread.php/6742-Konica-Minolta-Bizhub-C450-Admin-password-locked

******************************************************************************

Device: Kyocera taskalfa 300ci

Username: administrator

Password: admin00

******************************************************************************

Device: EnGenius ECB600

Username: admin

Password: admin

Default IP address: 192.168.1.1

******************************************************************************

Device: Aastra 6757i CT

Username: admin

Password:  22222

******************************************************************************

Device: Buffalo AirStation N600 WZR-600DHP

Username: admin

Password: password

Default IP address: 192.168.11.1

******************************************************************************

Device: D-Link DAP-2553

Username: admin

Password: there is none

Default IP address: 192.168.0.50

******************************************************************************

Device: OKI MC561

Username: Admin

Password: aaaaaa

******************************************************************************

Device: OKI MB770

Username: admin

Password: 123456

******************************************************************************

Device: Netgear ProSafe VPN FVS318v3

Username: admin

Password: no password

******************************************************************************

Device: Brother MFC 9840CDW

Username: admin

Password: access

******************************************************************************

Device: Sharp AR M277

Username: admin

Password: Sharp (case-sensitive)

Source: http://www.copytechnet.com/forums/sharp/21286-sahrp-ar-m277-scan-user-name-password.html

******************************************************************************